Heavy duty aluminium recess mounted floor joint covers utilising a free-floating centre plate held in position by cover plates. Suitable for use in areas with limited vehicular access. For areas where trolley traffic is prevalent, AL-HDC model, incorporating a secondary centre plate, is recommended. AL-HDM models have been designed for use in new to existing applications.
Series Details
- Joint Width: up to 100mm
- Horizontal: up to +95/-40mm
- Vertical: up to ±3mm
- Lateral: ∞ (Infinite)
- Load Capability: 1000kg point load
- Recess mounted floor joint cover
- Free-floating centre plate is held in position by cover plates
- AL-HDC features secondary centre plate, and is recommended for areas where trolley traffic is prevalent
- AL-HDM models are designed for new-to-existing applications
- Suitable for most floor finishes
- Durable and low maintenance
- Load capability: 1000kg point load
Movement Details
FLOOR TO FLOOR COVERS
To order any of the below models, please call +44 (0)1296 652800
| Model | Rapid Ship? | Joint Width (mm) | Exposed Surface (mm) | Min. Recess Depth Required (mm) | Min. Recess Width Required (mm) | Horizontal Movement (mm) | Vertical Movement (mm) | Lateral Movement (mm) |
|---|---|---|---|---|---|---|---|---|
| AL-100HD | NO | 25 | 127 | 30 | 137 | ±20 | 0 | ∞ |
| AL-200HD | NO | 50 | 228 | 30 | 238 | ±50 | ±3 | ∞ |
| AL-300HD | NO | 75 | 291 | 30 | 301 | +95/-40 | ±3 | ∞ |
| AL-400HD | NO | 100 | 318 | 30 | 328 | ±65 | ±5 | ∞ |
| AL-200HDC | NO | 50 | 228 | 30 | 238 | ±25 | ±3 | ∞ |
| AL-200HDM | NO | 50 | 190 | 30 | 144 | ±25 | ±3 | ∞ |
| AL-400HDM | NO | 100 | 248 | 30 | 202 | ±35 | ±3 | ∞ |
FLOOR TO WALL COVERS
To order any of the below models, please call +44 (0)1296 652800
| Model | Rapid Ship? | Joint Width (mm) | Exposed Surface (mm) | Min. Recess Depth Required (mm) | Min. Recess Width Required (mm) | Horizontal Movement (mm) | Vertical Movement (mm) | Lateral Movement (mm) |
|---|---|---|---|---|---|---|---|---|
| ALW-100HD | NO | 25 | 76 | 30 | 81 | ±10 | 0 | ∞ |
| ALW-200HD | NO | 50 | 139 | 30 | 144 | ±25 | ±3 | ∞ |
| ALW-300HD | NO | 75 | 187 | 30 | 192 | ±35 | ±3 | ∞ |
| ALW-400HD | NO | 100 | 208 | 30 | 213 | ±35 | ±5 | ∞ |
Note: Lateral movement is restricted by site conditions
Materials, Colours & Finishes
Aluminium sections: supplied mill finished as standard
Fixings
- Floor: fixings (by others) to suit substrate at 450mm centres and to achieve minimum 40mm embedment
- Wall: fixings (by others) to suit substrate at 450mm centres
NB: To ensure installation flexibility frames are not supplied pre-drilled
